Hot air dryers

Tilting centrifugal dryers

Standard hot air centrifugal dryer, tiltable, with 1.5 mm thick stainless steel basket, for drying metal parts after vibrating or galvanic treatment and for the extraction of oils from metal parts or shavings.

Features common to all SAV models

Structure made of electrowelded steel.
Basket made of 1.5 mm. thick stainless steel.
Heating with stainless steel coated armored heating elements.
Cycle timer and automatic stop.
Control panel with selectors and work cycle programmer.

Electronic SAV dryer

The electronic SAV dryer incorporates: progressive acceleration and deceleration, variable speed drive, automatic reversal of the direction of rotation and digital thermostat for temperature control, allowing to avoid shocks on the parts, to perfectly dry parts such as allen or cup-shaped screws and to perfectly treat temperature-sensitive parts.

Features of the electronic SAV dryer:

Variable speed drive for smooth start and stop.
Temperature regulator with digital thermostat.
Automatic reversal of the direction of rotation.

SAV SEMI-AUTOMATIC DRYER
On the other hand, the new semi-automatic SAV dryer receives the material to be dried, operates the start, closes the lid, dries and unloads the material, without the need for operator intervention throughout the drying process. At the same time, it is possible to program the continuous working cycles by means of an automaton.

By rotating 180º, the total unloading of the parts is ensured.
Characteristics of the semi-automatic model

Variable speed drive for smooth start and stop.
Temperature regulator with digital thermostat.
Automaton for continuous work programming.
Automatic reversal of the direction of rotation.

Model SAV-40 SAV-70
Capacity 40 kgs 70 kgs
Resistance 3.300 w 4.500 w
Motor/Rotation 0.75 kw/640 rpm 1.5 kw/500 rpm
Basket dimensions Diameter 470 mm
Height 285 mm
Diameter 490 mm
Height 400 mm
Machine dimensions Height 690 mm
Base 1120×790 mm
Diameter 490 mm
Height 400 mm
Machine weight 310 kgs 360 kgs