Operator and mobility
The operator is provided with protective equipment consisting of a hood with a large visor and an air filtration system, so that he can breathe clean air. The sandblasting machine is equipped with wheels for its displacement, with the advantage of facilitating access to different working points.
MODULAR PORTABLE SANDBLASTERS
Modular portable sandblasters blast sand, either dry or wet, in order to treat surfaces. Manufacturing is carried out by placing the concave upper part inward. To aid in making an internal inspection, the tank is equipped with a hand hole, and there is a highly sensitive valve for closing the tank. Each machine is equipped with attachment points to carry out the lifting in a correct way.
All sandblasting machines are equipped with a remote controlled pneumatic device to start and stop the sandblasting cycle, with a safety locking system to prevent accidental start-up. They can be completed with a hose for the abrasive, a nozzle and a mask.
Modular sandblasting machines model SM
Each sandblasting machine is equipped with a double pneumatic or electric remote control, upon request. This device allows the operator, from where he works, to start and stop the machine and to unblock the abrasive output when, due to humidity, it is not regular.
Each sandblasting machine is supplied equipped with: sieve, solid rubber wheels, device for remote start and stop control, locking system and 20 m. cable to prevent accidental start-up.
Modular sandblasting machines model SMS/SMES
SMS- PYMES sandblasting machines are equipped with the abrasive dosing valve Mod. PRV, in addition to having the same characteristics as the SM-SME range. This valve is controlled by a pneumatic pulse that determines when it opens or closes in line with the start and stop of the work cycle, maintaining the previously established setting unchanged. In this way, there is the advantage of completely eliminating the initial blockage in the abrasive tube when the sandblaster is started up, up to a distance of 20 meters.
Modular sandblasting machine applications
This machine allows the operator to perform the following operations:
- Air-water-sandblasting with air-water-abrasive mixture
- Interior restructuring
- Washing of surface treated with an air-water mixture
- Sandblasting of industrial products
- Dry sandblasting with an air-abrasive mixture
- Removal of traffic signs
- Stripping of glass resin boat components and hulls
- Blowing of the surface treated with air alone Main application sectors
This new patented system can be applied to all modular sandblasters and those equipped with remote control. The system allows the addition of water to the mixture of air and abrasive in order to obtain the following advantages in the different sectors of use:
- the gradual reduction of dust quantities until it is completely eliminated.
- decrease in compressed air consumption (up to approx. 25 %) in proportion to the increase in the amount of water added to the air/abrasive mixture.
Due to its characteristics, the WBK 10 kit also allows:
- Automatic interruption of the water flow when the sandblaster stops
- The regulation of water quantities by the operator from where it works a constant water flow rate of 2.5 it / min: up to 80 mt (max.).
The system can be supplied for connection to the water supply or, alternatively, using a water holding tank.
PORTABLE SANDBLASTERS WITH RECOVERY
Reclaim sandblasters are machines designed to carry out localized sanding or surface cleaning operations without the loss of dust and/or abrasives. The blasting equipment recovers the material instantly by means of a special brush nozzle.
All recovery sandblasting equipment is equipped with a compressed air pressure regulator that controls the blasting power and a pneumatic remote control to start and stop the work cycle. The remote control is operated by a manual lever valve equipped with a safety locking system and a pneumatic circuit closure with double pipe to prevent accidental opening.
Each sandblasting machine comes with CE marking, instruction manual, declaration of conformity with the Machinery Directive 98/37/EC and standard color paint.