CX Chemicals for Surface Vibration and Finishing
The Coniex CX line has been developed to optimize the processes of vibratory finishing, polishing, deburring, degreasing, brightening, and surface protection of metal and plastic parts. These compounds work in combination with abrasives, chips, and polishing media to improve finish quality, reduce processing times, and ensure consistent and repeatable results.
Descripción
Descripción
Deburred and polished
| Product | Main application |
|---|---|
| CX-3 | Gentle and precise deburring of plastic parts. Produces smooth, refined surfaces. Used primarily on buttons for laser engraving. |
| CX-4 | Deburring and trimming of plastics with greater cutting capacity than the CX-3. |
| CX-12 | Polishing of all types of metals and alloys, producing polished surfaces in a short amount of time. |
| CX-15 | Deburring of non-ferrous metals. Leaves surfaces smooth and uniform, ready for further polishing. |
| CX-16 | Powerful deburring of ferrous metals. Ideal for removing large burrs before polishing. |
| CX-19 | Deburring of ferrous metals to produce smooth, uniform surfaces. |
| CX-37 | Abrasive paste for fine deburring and smoothing of steel, stainless steel, and brass. |
| CX-38 | Abrasive paste for fine deburring and smoothing of all types of metals, producing a semi-gloss finish. |
Degreasing and cleaning.
| Product | Main application |
|---|---|
| CX-7 | Powerful degreaser for all types of metals. Removes oils, greases, and cutting fluids. |
| CX-17 | Degreaser with a built-in corrosion inhibitor for temporary protection of parts. |
| CX-20 | Degreaser and passivator for iron and steel. Suitable for spraying and immersion. |
| CX-32 | It degreases, polishes, and buffs iron parts, providing corrosion protection. |
| CX-57 | Chemical degreaser for immersion and ultrasonic cleaning of metals, copper, brass, and alloys. Ideal for use prior to galvanizing and coating. |
| CX-59 | Neutral degreasing additive for immersion baths and controlled-foam spraying. |
Buffed and polished.
| Product | Main application |
|---|---|
| CX-6 | Abrillantado en seco para metales y aleaciones utilizando serrín de maíz o soportes de madera. |
| CX-8 | Polishing and passivation for all types of metals. |
| CX-9 | Polished with stainless steel beads for ferrous metals, aluminum, brass, bronze, and precious metals. |
| CX-18 | Polished with stainless steel beads or chips for ferrous and non-ferrous metals. |
| CX-23 | Dry polishing for plastics and polyester using plant-based media. |
| CX-25 | A polish specifically designed for aluminum that produces a high-gloss finish. |
| CX-41 | High-gloss polishing gel for stainless steel. |
Passivation and corrosion protection.
| Product | Main application |
|---|---|
| CX-5 | Antioxidant for ferrous metals with a passivating effect and temporary protection. |
| CX-42 | Temporary passivation for brass and copper parts without chromium salts. |
| CX-44 | Immersion-type antioxidant for ferrous parts. |
Descaling and special treatments
| Product | Main application |
|---|---|
| CX-29 | Simultaneous descaling and polishing of hot-stamped brass and copper parts. |
| CX-35 | Descaling of brass parts to produce clear, semi-glossy surfaces. |
Decorative oxidation
| Product | Main application |
|---|---|
| CX-11 | Leather-colored oxidizer for brass or brass-plated parts. |
| CX-45 | Black oxidizing agent for silver or silver-plated items. |
